The purpose of the Civil Engineer position at Waters Excavations Pty Ltd is to provide professional engineering support in the planning, design, coordination and delivery of civil construction projects. The role will ensure works are technically sound, compliant with relevant Australian Standards and regulations, and delivered safely, efficiently and to the required quality standards.The Civil Engineer will be responsible for planning, designing, coordinating and supervising civil construction projects undertaken by Waters Excavations Pty Ltd. The position will assess site and ground conditions, prepare and review engineering designs, drawings, specifications and technical documentation, and provide practical engineering solutions. The role will monitor construction activities, coordinate with contractors and project stakeholders, assist with project scheduling and cost estimation, conduct site inspections and quality checks, resolve technical issues and maintain accurate engineering documentation throughout project delivery.&nbsp;DUTIES &amp; RESPONSIBILITIES•&nbsp;&nbsp;&nbsp;&nbsp;Inspect construction and excavation sites, assess site conditions and monitor progress against approved designs and specifications.•&nbsp;&nbsp;&nbsp;&nbsp;Prepare, review and interpret engineering drawings, plans, specifications and construction procedures.•&nbsp;&nbsp;&nbsp;&nbsp;Plan, design and oversee civil works including roads, drainage, sewerage, irrigation, earthworks and water infrastructure.•&nbsp;&nbsp;&nbsp;&nbsp;Coordinate site labour, materials, plant and equipment and assist with project scheduling and resource planning.•&nbsp;&nbsp;&nbsp;&nbsp;Assess soil and ground conditions to determine suitability, stability and safe construction requirements.•&nbsp;&nbsp;&nbsp;&nbsp;Monitor construction quality, workmanship and materials to ensure compliance with engineering standards and project specifications.•&nbsp;&nbsp;&nbsp;&nbsp;Prepare project cost estimates, monitor expenditure and assess the cost impact of design changes and variations.•&nbsp;&nbsp;&nbsp;&nbsp;Coordinate with contractors, subcontractors, surveyors, suppliers and other professionals to resolve technical and construction issues.•&nbsp;&nbsp;&nbsp;&nbsp;Monitor project progress, conduct site inspections and coordinate testing of construction materials and completed works.•&nbsp;&nbsp;&nbsp;&nbsp;Review and support civil designs using relevant engineering and 3D/GPS construction technologies where required.•&nbsp;&nbsp;&nbsp;&nbsp;Maintain accurate engineering records, site reports, drawings and project documentation.•&nbsp;&nbsp;&nbsp;&nbsp;Ensure civil works comply with Australian Standards, regulatory, environmental, quality and workplace health and safety requirements.&nbsp;QUALIFICATIONS &amp; REQUIREMENTS&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Bachelor’s degree in Civil Engineering or a related field.•&nbsp;&nbsp;&nbsp;&nbsp;2–3 years’ relevant experience in civil engineering, construction or infrastructure projects.•&nbsp;&nbsp;&nbsp;&nbsp;Proficiency in AutoCAD, Civil 3D and relevant engineering software.•&nbsp;&nbsp;&nbsp;&nbsp;Strong knowledge of civil engineering principles, construction practices and Australian Standards.•&nbsp;&nbsp;&nbsp;&nbsp;Experience in project planning, cost estimation, site coordination and technical problem-solving.•&nbsp;&nbsp;&nbsp;&nbsp;Strong analytical, communication and organisational skills with attention to detail.•&nbsp;&nbsp;&nbsp;&nbsp;Ability to work effectively with contractors, consultants and project stakeholders.&nbsp;WORKING HOURS: Full-time position, 38 hours per week.&nbsp;BENEFITS&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Competitive salary and stable long-term employment.•&nbsp;&nbsp;&nbsp;&nbsp;Opportunities for professional development and career progression.•&nbsp;&nbsp;&nbsp;&nbsp;Supportive, collaborative and safe working environment.•&nbsp;&nbsp;&nbsp;&nbsp;Work-life balance with consistent and reliable working hours.•&nbsp;&nbsp;&nbsp;&nbsp;Exposure to diverse civil construction and infrastructure projects.

Engineering

Annual

Seeking an experienced Civil Engineer to support project planning, design, site coordination, quality assurance, and successful project delivery.

Civil Engineer

Full time

The Electrical Project Engineer is responsible for supporting the testing, commissioning, validation, fault finding and on-site implementation of new and upgraded electrical traction and control systems on rolling stock.A key focus of the role is the commissioning and validation of new traction equipment installed on the rolling stock, including traction control system, choppers, contactors, protection equipment, control interfaces and associated vehicle electrical systems.The engineer will undertake engineering design and on-vehicle testing, analyse system performance and faults, support troubleshooting and root cause investigations, and prepare the engineering evidence required to demonstrate that modified rolling stock systems perform safely and in accordance with project requirements.The successful candidate should have a sound understanding of rolling stock electrical systems and the fundamentals of regenerative traction and electric braking systems, together with an understanding of railway RAMS and safety lifecycle principles, including EN 50126 and SIL2-related requirements. <h3>Benefits</h3><ul><li>Competitive salary package based on experience</li><li>Stable, long-term employment in a specialist rail engineering environment</li><li>Opportunity to work with industry-leading rail systems and technologies</li><li>Collaborative and technically skilled team environment</li><li>Exposure to major rail projects around Australia</li></ul> <h3>Task & responsibilities</h3>Testing, Commissioning &amp; Validation&nbsp;<ul><li>Perform static and dynamic commissioning of new and modified traction and control systems installed on rolling stock.</li><li>Support commissioning and validation activities across different projects.</li><li>Develop, review and execute test procedures, commissioning procedures, validation plans and work instructions.</li><li>Perform hardware and software testing of traction equipment and associated control systems.</li><li>Verify correct operation of traction, regenerative braking, braking chopper and associated control functions.</li><li>Validate vehicle interfaces, interlocks, protection functions, control logic and communication/network functions.</li><li>Record test results and maintain objective evidence demonstrating compliance with applicable requirements.</li><li>Analyse test data and prepare commissioning, validation and technical test reports.</li><li>Identify non-conformances during testing and support their investigation and resolution.</li></ul>Traction &amp; Rolling Stock SystemsThe role requires practical understanding of rolling stock electrical architecture and equipment including:<ul><li>DC traction systems and traction power distribution;</li><li>regenerative and electrical braking principles;</li><li>braking chopper circuits and braking resistors;</li><li>high-speed circuit breakers and electrical protection;</li><li>contactors, relays and auxiliary control circuits;</li><li>vehicle low-voltage and auxiliary electrical systems;</li><li>traction and braking control logic;</li><li>vehicle communication and control networks; and</li><li>diagnostic and data-logging systems;&nbsp;</li><li>Determining the type and arrangement of circuits, transformers, circuit-breakers, and other electrical equipment;</li></ul>The engineer is expected to understand how these systems interact at vehicle level rather than considering individual components in isolation.Fault Finding &amp; Root Cause Analysis<ul><li>Investigate electrical, traction and control-system faults identified during commissioning, production testing or vehicle operation.</li><li>Perform systematic fault finding using electrical schematics, diagnostic software, measurement equipment and data logs.</li><li>Analyse system behaviour and recorded data to identify the cause of intermittent and complex faults.</li><li>Undertake root cause analysis and document technical findings.</li><li>Work with suppliers and internal engineering personnel to identify corrective actions.</li><li>Verify corrective actions through repeat testing and provide evidence for technical closure.</li><li>Maintain clear records of faults, investigations, test results and resolutions.</li></ul>On-Site Engineering Support<ul><li>Perform commissioning, troubleshooting and validation activities on vehicles at depots, workshops and other rail operational environments.</li><li>Work safely around energised rolling stock electrical and traction systems in accordance with applicable procedures and authorisations.</li><li>Provide technical support during vehicle commissioning and trial activities.</li><li>Liaise with operators, maintainers, engineering teams and equipment suppliers during testing and fault investigations.</li><li>Provide technical guidance and training to relevant personnel on test procedures and newly installed equipment where required.</li><li>Support resolution of issues under time-critical commissioning and production conditions.</li></ul>Engineering Documentation<ul><li>Interpret electrical schematics, wiring diagrams, interface documents, technical specifications and equipment manuals.</li><li>Prepare and maintain test and commissioning procedures, validation plans and reports, fault investigation and RCA reports, work instructions, Bills of Materials, cable schedules, test records and evidence, engineering change documentation, and technical issue/action registers.</li><li>Ensure test evidence and engineering documentation are complete, traceable and suitable for project assurance and acceptance activities.</li></ul> <h3>Qualification & experience</h3><ul><li>Bachelor’s degree in electrical engineering or relevant and related qualification.</li><li>At least 3 years relevant experience as an Electrical Engineer or relevant and related role;&nbsp;</li><li>Basic understanding of rolling stock electrical and control systems.</li><li>Understanding of electric traction principles, including traction motors, power converters and regenerative braking.</li><li>Ability to read and interpret electrical schematics, wiring diagrams and technical specifications.</li><li>Demonstrated ability to perform structured electrical fault finding and root cause analysis.</li><li>Experience using electrical test equipment and interpreting measured and logged data.</li><li>Ability to prepare clear engineering test reports and technical documentation.</li><li>Understanding of engineering change, verification and validation processes.</li><li>Ability and willingness to undertake hands-on testing and fault finding on vehicles and at rail sites.</li></ul>

Join TTM Rail and help drive innovation in Australia’s rail industry through hands-on electronic design, testing, and maintenance.

Electrical Project Engineer - Rolling Stock / Traction Systems

About SEL
SEL invents, designs, and builds digital products and systems that protect power grids around the world. This technology prevents blackouts and enables customers to improve power system reliability and safety at a reduced cost. A 100 percent employee-owned company headquartered in Pullman, Washington, SEL has manufactured products in the United States since 1984 and now serves customers worldwide.
Our mission is simple: to make electric power safer, more reliable, and more economical.
Are you a student looking to gain real-world experience while continuing your studies? Join SEL as an Engineering Intern and gain valuable experience with flexible hours and mentorship from industry experts.
About the Role - Electrical Engineering Intern
Essential Duties and Responsibilities 1. Provide technical support to SEL staff &amp; customers. 2. Develop and maintain knowledge in SEL processes and technologies. 3. Perform testing on new and existing technology. 4. Document and communicate test results. 5. Follow and apply SEL Values, Principles of Operations, and World Class Manufacturing Principles. 6. Understand. Create. Simplify. 7. Other duties as assigned.
Required Qualifications Experience in programming and script files Practical knowledge of 3-phase power systems Working knowledge of emulators and logic analyzers Ability to use MS Windows and serial port terminal emulation software Practical knowledge of SEL protective relays &amp; automation controllers Ability to use Microsoft Visio Strong writing, documentation, and speaking skills Ability to learn new skills and assume new responsibilities Ability to work cooperatively in a team environment
Ready to make a difference? Apply today and help us shape the future of engineering solutions across the APAC region!
To Apply For This Position:
Interviews will commence shortly, so if you have what it takes to be successful in this role, please apply now by providing your CV and a brief cover letter regarding your suitability for the role.

About SEL
SEL invents, designs, and builds digital products and systems that protect power grids around the world.

Engineering jobs in Carwarp

Civil Engineer

Electrical Project Engineer - Rolling Stock / Traction Systems

Electrical Engineering INTERN

Applications open to:

View all jobs from

Individuals

Employers

Service providers

Workinitiatives

Sign up for our newsletter ‘The Initiative’

Follow us